"industrial blower fan"

High-efficiency Energy-saving Induced Draft Fan for Power Generation Industry Product Overview Backward-curved blades, high efficiency and energy saving, flat performance curve, and wide adjustment range in the high-efficiency zone. The impeller is made of wear-resistant materials, and the casing has a reasonable split structure, making it easy to install and maintain. Key Features Backward-curving blades High efficiency and energy saving Stable operation Wear-resistant Easy

Промышленный разбавляющий вентилятор для очистки дымовых газов и выхлопных газов. Ручки 330°C, 16150м³/ч, 5500Па. Высокоэффективные загнутые назад лезвия, настраиваемые материалы/мощность. Гарантия 1 год.

Product Description: The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 °C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are allowed in the gas, and the dust and hard particles contained in the gas

Высокопроизводительный вытяжной вентилятор для печей нефтехимического крекинга. Выдерживает производительность 250 000–400 000 м³/ч при температуре 175°C и давлении 1500–3000 Па. Специальные материалы (углеродистая сталь/304/316), подшипники премиум-класса SKF/FAG и гарантия на 1 год обеспечивают надежную работу.

Product Description: The 5-10 series ventilator is a high efficiency and energy saving product developed by our company, which is used for ventilation and exhaust system of smelting, chemical, medicine and dust removal production lines. In the coal-fired boiler system, the ventilation and induce draft systems of various boilers with evaporation capacity of 20 tons/hour to 800 tons/hour can be configured. Features: 1.It can output higher outlet pressure and provide more gas

Glass Production Line Equipped with Induced Draft Fan Specially designed for various glass production lines such as float glass, photovoltaic glass, and specialty glass, this induced draft fan is the core power equipment for the exhaust gas treatment and waste heat recovery systems of critical sections like the melting furnace, tin bath, lehr, and raw material processing. The fan is primarily used to stably extract dust-laden, corrosive gases (e.g., SO₂, NOₓ, HCl, alkali

Cement Process Kiln Tail Exhaust Fan The Cement Kiln Tail Exhaust Fan is the core driving force and key control equipment in the preheater and calciner system of a modern dry-process cement production line. Installed after the outlet of the kiln-end preheater (C1 cyclone), it undertakes two primary critical tasks: Establish and maintain a stable negative pressure throughout the entire preheater, calciner, and rotary kiln system, ensuring high-temperature flue gas flows along

Secondary Air Fans for Power Plant Boilers Product Overview The secondary air fan is a critical component of the combustion air system in power plant boilers. Its primary function is to provide a precisely controlled flow of air to the combustion zone above the burner, facilitating complete fuel combustion, optimizing flame shape, reducing nitrogen oxide (NOₓ) formation, and enhancing overall boiler thermal efficiency. Operating in high-temperature environments (handling

Applications for belt driven kiln fan 75 kw ♦ Industrial boiler blowing air, Industrial boiler inducing air, Industrial boiler waste gas dust collecting. Performance Application Temperature Normal temperature Air Hot Air Air composition Clean air Dusty air Corrosive gas Combustible gas Powder materials Light particle materials Performance Impeller diameter 800~2950 mm Speed of mainshaft 730~1450 rpm Pressure range 553~7218 Pa Flow range 5229~48000 m3/h Structure Blade