"industrial ventilation fan"

Центробежный вентилятор высокого давления из прочной углеродистой стали. Обеспечивает давление 3031–16250 Па и расход воздуха 8792–123090 м³/ч. Имеет подшипники SKF/FAG, гарантию 1 год и индивидуальные конфигурации для промышленного применения.

Настраиваемый вентилятор высокого давления для транспортировки материалов с низким уровнем шума. Имеет износостойкую конструкцию, различные варианты материалов и гибкие конфигурации привода. Сертификат CE, ISO 9001 с доставкой в ​​течение 30 дней.

Antifraying Long Lifetime High Temperature Centrifugal Blower Fan Introduction Antifraying Long Lifetime High Temperature Centrifugal Blower Fan: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Medium temperature: The medium temperature of standard fans is not more than 80 °C, the V-belt driving type fan can transport media below

Backward Curved Drying Dust Collector Centrifugal Blower Fan Introduction 1. The Backward Curved Drying Dust Collector Centrifugal Blower Fan can output high pressure and is suitable for any industrial occasion where high pressure & normal temperature gas is required. 2. The energy transfer efficiency is high, the energy of the motor is directly applied to the impeller, and there is no energy consumption during the transfer. 3. The motor uses high-efficiency and energy-saving

AC Motor Materials Drying Dust Collector Centrifugal Blower Fan Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Medium temperature: The medium temperature of standard fans is not more than 80 °C, the V-belt driving type fan can transport media below 150 °C for a long time

Wear Resistant Steam Boiler Backward Flue Gas Centrifugal Blower Fan Introduction Medium requirements for Wear Resistant Steam Boiler Backward Flue Gas Centrifugal Blower Fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Medium temperature: The medium temperature of standard fans is not more than 80 °C, the V-belt driving

16Mn Single Inlet Large Capacity Centrifugal Flow Fan Blower Introduction This can use different speeds to meet the requirements of various dust collectors in the same tonnage boiler, combined redundant fan series and machine number. It is used to transport various common gases and hard materials in industrial production, and is suitable for various harsh conditions such as high temperature, wear and corrosion. It is capable of outputting a higher outlet pressure while

Q345 Coupling Driven Antiwear Metallurgy Industrial Centrifugal Fans Introduction Of Centrifugal Fan 1. It can work stably at a high medium temperature, and can output a large gas flow with low noise when the pressure requirement is met. 2. The fan blade placement angle is optimized, more wear-resistant and longer service life. 3. The air damper can be used to flexibly adjust the pressure and flow of the fan during operation. It is also possible to select a variable frequency

Heavy Duty Efficient Energy-Saving Explosionproof ID Boiler Fan Introduction The 7-08.35 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. It belongs to small flow and medium pressure series. Technical data series model Rotation Speed (r/min) Total Pressure (Pa) Air Capacity (m³/h) Power (kW) 7-09 5D 3030 2982 ~ 3456 4486 ~ 8971 11 ~ 15 5.6D 2360 2623～2264