Наши продукты
Продолжительность жизни центробежного вентилятора сборника пыли легированной стали длинная взрывозащищенная
Alloy Steel Long Lifetime Explosionproof Dust Collector Centrifugal Fan Detail introduction The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. The fan can output higher gas pressure, and can provide more gas flow at the same time, low noise. In the case of using the common base, the installation is very simple and basically does not require the support of professional technicians. The motor shaft is elastically connected with the
Печи охлаждая выход по энергии воздушных потоков вентилятора сборника пыли высокий
High Air Flow Energy Efficiency Kilns Cooling Dust Collector Fan Detail introduction The 9-10 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. Before the induced draft fan, dust removal device with a dust removal efficiency of no less than 85% must be installed to reduce the dust content of the smoke entering
Высокая температура вентилятора жидкего газа воздухоотводной трубы промышленного боилера мотора AC основная
AC Motor High Temperature Industrial Boiler Primary Air Flue Gas Fan Introduction Of Centrifugal Fan The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The fan is made of high quality carbon steel, and can also use stainless steel or other metal materials according to customer requirements.
Отсталое изогнутое промышленное вентилятора газообразного отхода сверхмощное для машины спекать
Heavy Duty Industrial Backward Curved Sintering Machine Flue Gas Fan Introduction Of Centrifugal Fan The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The fan is made of high quality carbon steel, and can also use stainless steel or other metal materials according to customer requirements.
Промышленный вентилятор газообразного отхода роторной печи известки выхода по энергии взрывозащищенный
Industrial Energy Efficiency Anti-Explosion Lime Rotary Kiln Flue Gas Fan Introduction Of Centrifugal Fan Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Medium temperature: The medium temperature of standard fans is not more than 80 °C, the V-belt driving type fan can transport media
Вход воздуходувки сборника пыли выхода по энергии длинной жизни одиночный
Long Life Energy Efficiency Single Inlet Dust Collector Fan Detail introduction The 8-17 series high-pressure small-flow fan is designed for applications requiring high pressure. Under the premise of ensuring a certain amount of air, the full pressure can reach the high pressure requirement. It is mainly used for blasting furnace blast and other forced air supply, and can also be used for tunnels to exhaust or supply air through hard pipes. Customized design according to
Центробежный вентилятор 4486 цемента вытыхания Antifraying мотора AC | 8971m3/h
AC Motor AC Motor Antifraying Exhaust Cement Blower Fan Introduction The 7-08. series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. It belongs to small flow and medium pressure series. It has stable and high performance and is widely used in environmental dust removal, material transportation and equipment matching in industrial fields. Technical data series
Воздуходувка погрузо-разгрузочной работы засыхания продолжительности жизни одиночного входа Q235 длинная
Q235 Single Inlet Long Lifetime Drying Material Handling Blower Introduction G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low noise and high efficiency. They can transport clean gas, dusty
засыхание материалов высокого центробежного нагнетателя давления 10635~12427Pa переднее
High Pressure Forward Materials Drying Stainless Steel Blower Introduction Of Centrifugal Fan The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 ° C (maximum not more than 80 ° C). The dust and hard particles contained in the medium
Засыхание промышленного центробежного нагнетателя нержавеющей стали v управляемое поясом взрывозащищенное
Stainless Steel V-Belt Driven Explosionproof Drying Industrial Centrifugal Fans Introduction Of Centrifugal Fan The 4-09 series large-flow centrifugal fan is the earliest used fan in China, and it is also the most commonly used fan. The impeller is annealed to eliminate the internal stress generated during welding, ensuring that the impeller does not undergo creep and cracks. Fan systems with impeller diameters less than 1400 mm at normal temperature do not require additional
Боилер одиночных вентиляторов передний CFB входа Q235 промышленных центробежных
Q235 Single Inlet Forward CFB Boiler Industrial Centrifugal Fans Introduction Of Centrifugal Fan The 4-09 series large-flow centrifugal fan is the earliest used fan in China, and it is also the most commonly used fan. The impeller is annealed to eliminate the internal stress generated during welding, ensuring that the impeller does not undergo creep and cracks. Fan systems with impeller diameters less than 1400 mm at normal temperature do not require additional bearing
Доменная печь одиночного вентилятора давления входа высокого центробежного высокотемпературная
Single Inlet High Temperature Blast Furnace High Pressure Centrifugal Fan Introduction Of Centrifugal Fan The 9-10 series high-pressure centrifugal fan is the latest developed high-efficiency and energy-saving product, whose performance fully meets the aerodynamic performance of general fan 9-08 series, and has the characteristics of high efficiency, low noise, flat performance curve, large flow regulation range and wide efficient area. It is suitable for conveying air and
Плавильня доказательства ссадины вентилятора воздуходувки давления длинной продолжительности жизни высокая
Long Lifetime Abrasion Proof Foundry High Pressure Centrifugal Fan Introduction Of Centrifugal Fan The 9-10 series high-pressure centrifugal fan is the latest developed high-efficiency and energy-saving product, whose performance fully meets the aerodynamic performance of general fan 9-08 series, and has the characteristics of high efficiency, low noise, flat performance curve, large flow regulation range and wide efficient area. It is suitable for conveying air and non
Охлаждать стены печи вентилятора высокого давления мотора AC управляемый соединением центробежный
AC Motor Coupling Driven Oven Wall Cooling High Pressure Centrifugal Fan Introduction Of Centrifugal Fan The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 ° C (maximum not more than 80 ° C). The dust and hard particles contained in
Энергосберегающий боилер мельницы угля назад изогнул емкость центробежного вентилятора большую
Energy Saving Large Capacity Coal Mill Backward Curved Boiler Fan Introduction Of Centrifugal Fan The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. It has a larger output flow than the 5-11 series. It is also used to transport a variety of common gases and hard materials in the industrial field, the application object is exactly the same as 5-11 series fan. Technical data series model Rotation Speed (r/min) Total
HG785 сплавило стальное энергосберегающее отсталого вентилятора боилера взрывозащищенное эффективное
HG785 Alloyed Steel Explosionproof Efficient Energy-Saving Backward Boiler Fan Introduction Of Centrifugal Fan The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. It has a larger output flow than the 5-11 series. It is also used to transport a variety of common gases and hard materials in the industrial field, the application object is exactly the same as 5-11 series fan. The fan speed can be flexibly set by matching
Соединять управляющ впрыской угля нержавеющей стали вентилятора индукции проекта
Coupling Driving Stainless Steel Coal Injection Induced Draft Fan Introduction Of Centrifugal Fan The 5-06 series fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers
Алюминий сплавил передние печи вентилятора наведенного проекта промышленные
Aluminium Alloyed Forward Industrial Kilns Induced Draft Fan Introduction Of Centrifugal Fan 6-04 series fans have high pressure coefficient, low peripheral speed, low noise, flat performance curve and wide area of high efficiency. Bearing cooling method: according to gas temperature and operating environment conditions choose low-cost water-cooling method or oil-cooling method with good heat dissipation performance. For extremely high temperature operating conditions, can
